Operating procedures for loaders

There are three key points to the operating procedures of loaders. One is to maintain smooth traffic between the vehicle and the outside world; Secondly, it is prohibited to burn down loaders; The third is to ensure the stability of the loader. Below is a detailed introduction: 1. The two wheel drive loader must be kept parallel to the road surface. The loader must maintain balance with both hands and not deflect the front of the vehicle. In case of accidents such as rollover and collision with other objects, self rescue should be carried out in a timely manner. 2. After the loader is loaded onto the vehicle, separate boxes should be placed on the vehicle to ensure accurate positioning. The tire must be facing the center of the wheel, otherwise it cannot be used as a formal vehicle. Incorrect positioning of the loading locomotive wheel can cause left and right swinging; 3. Any measures taken by the operator to maintain balance or protect the loader during the loading process are acceptable to the loader. However, the loader operator should not make sudden noises, lightning or other violent noises during the loading process. If the loader is subjected to strong impact force, it may lose control and must be braked in a timely manner.